Diamond Art Guide
A smiling woman looking down at a finished floral diamond painting on a sunny kitchen table

Diamond painting tools and how to use them

What every piece in the kit bag is called, what it does and how to hold it, plus the add-ons worth buying and the ones that can wait.

How we pick · Updated · We earn a commission when you buy through our Amazon links.

Every diamond painting kit comes with the same small set of tools: a drill pen, a square of wax, a grooved tray and zip bags of drills, and some kits add tweezers or a metal plate. The pen picks drills up with the help of the wax. The tray lines them up so the pen can reach them. Tweezers and the plate fix mistakes, and a roller presses the finished work down. Below is each tool by name, what it does, and how to hold it.

Diamond painting tool names, and what each one does

Sellers use different names for the same thing, which is half the confusion when a kit arrives. This table matches them up.

ToolAlso sold asWhat it doesIn the kit bag?
Pendrill pen, applicator, stylus, pickerPicks up drills and sets them on the canvasYes, usually plastic
Waxglue clay, sticky clay, wax pad, puttyMakes the pen tip tacky enough to lift a drillYes
Traydrill tray, gem tray, rhinestone plateHolds one color and turns drills face upYes, often one
Multi-placer tipmulti-placer, 3/6/9 tip, multi toolPicks up a row of drills at onceSometimes
Tweezerscraft tweezers, fix toolLifts wrong drills, nudges crooked ones, removes lintSometimes
Platestraightener, correction plate, rulerPushes rows of square drills into lineSometimes
Rollerbrayer, pressing rollerPresses finished drills into the glueRarely
Release papercover paper, parchmentCovers glue you're not working onNo
Light padlight board, LED tracing padLights the symbols from underneathNo
Diamond painting tools, labeled Left side shows what is in a typical kit bag: pen, wax square, tray and drill bags. Right side shows add-ons: multi-placer tip, tweezers, straightener plate, roller, release paper and light pad. IN THE KIT BAG ADD-ONS PenWax / clay Tray (grooves, spout)Drill bags Multi-placer tip (3, 6, 9) TweezersPlate RollerRelease paper Light pad (goes under the canvas) Plus the canvas, its symbol legend and protective film.
Left: what a typical kit bag holds. Right: the add-ons people buy later. Kits vary, so check your own bag against the legend before you start.

The pen: how to pick up and place a drill

The pen does nearly all the work, so learn it first. The tip is a hollow tube. Wax inside the hollow grips the top of a drill, and the canvas glue grips harder, so the drill lets go of the pen once it touches its symbol.

  1. Press the tip straight down into the wax two or three times. A small plug of wax in the hollow is enough.
  2. Touch the tip to the faceted top of a drill sitting face up in the tray, and lift.
  3. Set the drill flat side down on its symbol, then pull the pen away.
  4. Dip again when drills start falling off on the way to the canvas.

Kit pens are thin plastic and light, which is fine for a first painting and tiring after an hour. A refillable pen such as the benote wax pen keeps the wax inside a metal barrel and feeds it to the tip, so there's no separate square to dab. About 5,000 sold last month. Our diamond painting pen guide compares pen shapes and vacuum pens.

The multi-placer tip

A multi-placer is a wide tip with a row of notches, sized for 3, 6 or 9 drills. It only works when drills sit in a tight line, so tip the tray until a run of drills rests against one ridge, then push the multi-placer along that row so each notch picks one up. Lay the row on a run of matching symbols. It saves real time on backgrounds and large single-color areas. At edges and on scattered symbols, go back to a single tip. The screw-tip multi-placer kit includes 1, 3, 6 and 9 tips plus a bent tip, and the threaded tips don't work loose the way push-in plastic ones can.

Wax or glue clay: how much and when to change it

The square in the kit is usually pink, blue or green clay under a peel-off film. Peel the film back only partway so the rest stays clean. Use less than you'd think: a tip overloaded with wax picks up two drills at once or leaves a smear on the drill's facets.

Wax stops working when it fills with lint and tray dust. When it looks fuzzy, throw that piece out. Refill packs like these red wax refills with storage cases cost little. Putty is the longer-lasting alternative; our wax vs putty comparison covers when it's too sticky and what to do.

The tray: the shake that turns drills face up

Pour one color into the tray, a single layer and no more. Shake it gently side to side. The grooves catch the drills and most of them flip so the faceted side faces up, which is the side the pen grabs. The few still lying on their backs get another shake. When you're done with that color, tip the tray toward its spout corner and pour the drills back into their bag.

One tray means pouring back every time the color changes. Several trays let you keep four or five colors out for a busy area. The ARTDOT interlocking trays (10 to a pack) snap together side by side and stack when you pack up. See the diamond painting trays guide for lidded sets.

A grandmother and granddaughter laughing as the girl holds up a finished sunflower diamond painting
The kit tools are enough to finish a painting. Add-ons make the next one faster and easier on the hands.

Tweezers: what they're for and how to hold them

Tweezers fix things. Placing drills with them is slow, and the pen does that job better. Use them to:

  • lift a drill that landed on the wrong symbol
  • nudge a crooked drill back into its row
  • pick hair, lint or a stray drill off exposed glue
  • catch the edge of release paper without touching the glue

Hold them like a pencil, almost flat to the canvas. Slide the tips in from the side, under the widest part of the drill. Squeeze gently and lift straight up. Pushing the points down into the canvas can tear the glue layer or poke the backing. If the glue starts lifting with the drill, stop. Nudge the drill sideways instead. Kit tweezers are often flimsy with points that don't meet. Our diamond painting tweezers guide compares tip shapes for each of these jobs.

The plate: straightening square drills

Square drills are meant to sit edge to edge in a grid, and one crooked drill pushes its neighbors out of line. The metal plate (also called a straightener or correction plate) has a straight edge. Lay it against the side of a row and push gently until the drills line up, then do the same across the columns. Do it before the glue sets and before you roll. Round drills leave small gaps by design and need this less. The full method, and when the glue has already set, is in how to straighten diamond painting drills.

The roller: pressing a section down

A roller presses finished drills firmly into the glue so they don't pop off later. The order matters: fix wrong and crooked drills first, because rolling locks everything where it is. Then, on a hard table, roll along the rows with firm, even pressure. Then make one pass across. Roll each section when you finish it, and the whole canvas once more before sealing or framing. The 5D diamond painting roller has a 3.7-inch wheel and 4.8 stars from more than 2,700 ratings. Wider options are in the diamond painting roller guide.

Release paper and the light pad

The film on a new canvas tears easily, and exposed glue collects dust. Release paper is a non-stick sheet you lay over the glue you aren't working on, so you can open the canvas one small window at a time. The ARTDOT release paper comes as 200 double-sided sheets, 15 x 10 cm, with a craft knife and tape. Our release paper guide walks through the window method.

A light pad goes under the canvas and lights the printed symbols from below, which helps most on dark or busy designs. Size matters more than brand, so see the light pad guide to match it to your canvas. If small symbols are still hard to read, a magnifying lamp is the next step.

The tools in order, one session

  1. Lay the canvas flat with the light pad under it, if you have one.
  2. Peel back the film (or cut a window in release paper) over one small area.
  3. Pour one color into a tray and shake.
  4. Load the pen with wax and fill that color's symbols. Switch to the multi-placer for large blocks.
  5. Check the section. Tweezers for wrong drills, the plate for crooked rows.
  6. Roll the finished section, then cover the next open area before you stop.

Which three tools to add first

A better pen with multi-placer tips comes first, because you touch it for every single drill. A light pad is second. It's the most expensive of the three, and it makes symbols readable for every hour you paint. Extra trays are third and cost very little. The roller and release paper can wait until you know you'll finish a second kit, and storage and sealer come after that. For specific picks and a ready-made cart, go to our best diamond painting tools and accessories list. If you haven't opened your first kit yet, how to do diamond painting walks through the whole first session.

Sales figures and ratings are from Amazon on October 21, 2026, and tool details come from each seller's listing. Prices change often, so the links show the current price on Amazon. How we research · Affiliate disclosure

Questions people ask

What tools do you need for diamond painting?
Only what comes in the kit: a drill pen, a square of wax or glue clay, a tray and the canvas with its bags of drills. Everything else is an add-on. The three that make the biggest difference are a more comfortable pen with multi-placer tips, a light pad, and a few extra trays.
What are the tweezers for in diamond painting?
Fixing, not placing. Tweezers lift a drill that went on the wrong symbol, nudge a crooked one back into line, and pick hair or lint off exposed glue. Slide the tips in low and lift straight up so the glue underneath stays put.
What is the metal plate in a diamond painting kit for?
It's a straightener. Lay its straight edge against a row of square drills and push gently to line them up before you roll the section. Some pens, like the benote refillable pen, include one.
How do you use a multi-placer tip?
Load it with wax, line drills up against one ridge of the tray so they sit in a tight row, then push the tip along the row so each notch picks up one drill. Lay the row down on a run of matching symbols and fill any gaps with a single tip.
How much wax do you put on a diamond painting pen?
Very little. Press the tip straight down into the wax two or three times so a small amount fills the hollow. If drills start dropping off, dip again; if the wax looks linty or fluffy, swap it for a fresh piece.
Do you need a roller for diamond painting?
It isn't required, but it helps drills stay on for years. Roll each finished section on a hard table, along the rows and then across, after you've fixed any crooked or wrong drills. A rolling pin works if you don't have one.